Product details

The new compact Series 400 Smart electric actuator a bright OLED screen that provides the user with actuator status information, and used in conjunction with external push buttons, allows local control and many parameters and functional adjustment options. Select a tab below for full details. 400Nm torque output, manual override, internal space heater, and IP67 PC+PET housing as standard. F07/10 x 22mm ISO 5211 for direct mount to your valve. Available 95-265VAC or 24VAC/DC, 12VDC. With an LED status light for Open, Close and Alert for over torque/ valve jam conditions. Temperature and Humidity sensors. Declutchable manual override selector button.  

Product options

Standard Open/Close, power to open, power to close. Stays put on loss of power.

Fail closed on loss of power. Internal super capacitor is charged whilst power is applied, when removed, the capacitor will close the actuator. Fail open also available

Modulating control via digital encoder and position sensor. High levels of accuracy available with programable feature such as deadzone. 4-20ma, 0-10V, 2-10V, 0-20mA.

Modulating control via 4-20ma, 0-10V or 2-10V with failsafe functionality for incase power is lost. Internal super capacitor can be used to fail closed, open or to a mid position.

Configurable via the SmartMenu, you are able to set 3 position operation. For example, you can set open, close and a mid position. Or you could set 0-90-180 degree for a 3 way valve.

Via our SmartMenu, our smart actuators have local control as standard. A password protected menu allows the user to drive the actuator open or close via the push buttons located on the actuator screen. This is an electronic manual override when power is applied.

All our actuators have open and close feedback. If using a Basic actuator this is via mechanical switches. If using our Smart series, this is achieved via electronic relays. Note that our Modulating actuators do not have end of travel feedback, they have a modulating output for example, 4-20ma input + output.

All our Smart actuators have a SmartMenu with a password protected firmware onboard. Once the password is entered, you are able to change parameters such as speed, working angle, failsafe position, 3 position setup and much more.

All actuators have manual override as standard. Each actuator is supplied with an allen key to be used when power is NOT applied. You must disconnect power to use the mechanical manual override. For Smart series you also have Local Control manual override.

The AVA Product Range

With a choice of either an AVA basic providing simple on-off functionality, or an AVA smart actuator providing complex functions, offered in a truly compact housing, select your AVA electric actuator from the ranges below: