Product details

Basic 50 series have a break torque of 60Nm and run torque of 50Nm. Available as standard in a PC+PET plastic housing or aluminium option, has an F05/07 x 14mm ISO5211 mounting and is supplied as standard with a 0.8m pre wired multi core cable. Available in 95-265VAC and 24VAC/DC, or 12VDC. 

Product options

Standard Open/Close, power to open, power to close. Stays put on loss of power.

Fail closed on loss of power. Internal super capacitor is charged whilst power is applied, when removed, the capacitor will close the actuator. Fail open also available

Fast acting open and closing time available, as standard the run time is typically 50% less than the standard run time. For 10, 20 and 50Nm series, 1 second is available using 24VDC motor.

All our actuators have open and close feedback. If using a Basic actuator this is via mechanical switches. If using our Smart series, this is achieved via electronic relays. Note that our Modulating actuators do not have end of travel feedback, they have a modulating output for example, 4-20ma input + output.

All actuators have manual override as standard. Each actuator is supplied with an allen key to be used when power is NOT applied. You must disconnect power to use the mechanical manual override. For Smart series you also have Local Control manual override.

The AVA Product Range

With a choice of either an AVA basic providing simple on-off functionality, or an AVA smart actuator providing complex functions, offered in a truly compact housing, select your AVA electric actuator from the ranges below: